После того, как Вы введете почтовый индекс, мы сразу же назовем Вам контактного сотрудника, в соответствии с Вашим запросом.
E2 R100 - Two-piece e-tube - Chip protection - Swivel-on lid
Since igus® launched the snap-open and (two-piece) e-tube in the mid 80s, many additional parts and innovations have supplemented the product range. e-tubes are usable in areas with hot chips, dirt and dust generated in wood processing, steel works, pulp factories, textiles, agriculture, coal-fired plants and in many other unfavorable environmental conditions. Select the cost efficient, alternative Series R100 for applications with slow and medium speeds.
The cost efficient alternative for applications with slow and medium speeds.
To open the E.Tube, prize the lid with a screwdriver and then swivel it.
You can find the right e-chain® quickly by entering concrete parameters and with the aid of a comparison table.
Joining and separating of the e-tubes.
Applications in various industrial sectors and in the igus® test laboratory.
Series R117
Inner height hi: 21 mm
Inner widths Bi: 20 - 100 mm
bending radii R: 63 - 180 mm
Pitch: 30,5 mm
Series R118
Inner height hi: 21 mm
Inner widths Bi: 20 - 100 mm
bending radii R: 63 - 180 mm
Pitch: 30,5 mm
Series R157
Inner height hi: 40 mm
Inner widths Bi: 40 - 200 mm
bending radii R: 100 - 250 mm
Pitch: 46 mm
Series R158
Inner height hi: 40 mm
Inner widths Bi: 40 - 200 mm
bending radii R: 100 - 250 mm
Pitch: 46 mm
Series R167
Inner height hi: 50 mm
Inner widths Bi: 50 - 250 mm
bending radii R: 100 - 300 mm
Pitch: 58,8 mm
Series R168
Inner height hi: 50 mm
Inner widths Bi: 50 - 250 mm
bending radii R: 100 - 300 mm
Pitch: 58,8 mm
Excellent protection against chips (even hot chips)
Rugged and tight
Snap-open alternately along inside or outside - Swivelable or removable lid, short installation time
Space-saving through good internal/external dimensions ratio
Modular interior separation options
Double stop dog system for longer service life and long, unsupported lengths
Universal KMA mounting brackets with potential for "all-round" fastening
Machine tools
Timber Processing Machines
General mechanical engineering etc
In all areas exposed to dirt and chips
iF Design Award for series R117/R118 and series R68
ESD classification: electrically conductive ESD versions upon request
UL94-V0 classifications upon request
e-tubes made of igumid HT: hot swarf (up to 850°C) cannot burn in. Available as custom design upon request.
