Контактное лицо
OOO HENNLICH

Nab. Reki Lazuri 15A

170008 Tver

+7 4822 787180, доб. 317
+7 4822 787180, доб. 380

Due to order peaks, the delivery time for single items is 10-15 working days longer than stated. Please refer to our order confirmation for the specific delivery date.For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

iglidur® L350, подшипник скольжения, мм

  • Good wear resistance at medium high temperatures
  • Good wear resistance at high temperatures
  • Suitable for extremely high speeds
  • Very good coefficient of friction
  • Low humidity absorption
  • Good wear resistance under water
  • High media resistance
  • Resistant to dirt and dust
Описание продукта
iglidur® L350 | High performance at a lower cost
iglidur® L350 is extremely long-lasting. Developed for the best coefficients of wear and friction at speeds of 1.5m/s and more, this material outperforms classic plain bearings in high-speed rotation operation.
 
Typical application areas
 
Станки
iglidur® L350 high-speed test
 
You can find further applications here:
Отраслевые решения
 
When to use it?
  • For rotating applications at high speed
  • If the highest service life is required
  • For high pv values with low loads
  • At operating temperatures up to +180°C 
    (long-term, short-term up to max. +210 °C)
When not to use it?
Чтобы найти нужный продукт, воспользуйтесь возможностями фильтрации
 
Tolerances and measuring system
The installation height and tolerances of iglidur® plain bearings are dependent on the material and wall thicknesses. For each material, the moisture absorption and the thermal expansion are decisive factors. Plain bearings with low moisture absorption can be designed with a minimal bearing clearance. The rule of thumb for wall thickness: the thicker the wall of the bearings, the larger the clearances must be.
Способы испытаний
 
Assembly
iglidur® plain bearings are press-fit bearings. The inner diameter adjusts only after press-fitting into the correctly toleranced housing hole. The press-fit excess dimension can be up to 2% of the inner diameter. This ensures the secure press-fitting of the bearing. Axial or radial movement in the housing is also prevented this way.
iglidur® — сборка, склейка, машинная обработка
Сертификаты и стандарты
Соответствует стандартам RoHS
В соответствии с 2011/65/EU (RoHS 2)
Технические характеристики
принадлежности
Загрузки