Контактное лицо
OOO HENNLICH

Nab. Reki Lazuri 15A

170008 Tver

+7 4822 787180, доб. 317
+7 4822 787180, доб. 380

Due to order peaks, the delivery time for single items is 10-15 working days longer than stated. Please refer to our order confirmation for the specific delivery date.For urgent, short-term requirements, please contact us personally so that we can realise the delivery time necessary for you. You will find your contact person at the top of the menu under "My contact person", next to the language/country selection, or on this page.

Spherical ball, A180EM, interchangeable spherical ball, slim, mm, igubal®

  • Dimensional series: E following DIN ISO 12240
  • Material of spherical ball: iglidur® A180
  • For various metal bearing housings
  • Complies with FDA regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • Good wear-resistance
  • Материал сферического шарика: iglidur® A180
Описание продукта
igubal® spherical ball A180 slim
 
Every single iglidur® material has its own special properties, which determine its suitability for specific applications and requirements.
iglidur® A180 - FDA-compliant material for applications with low to medium loads in the immediate vicinity of (or in direct contact with) food or drugs, as well as humidity. The spherical ball for metal bearing housings are available for housing numbers 203 to 210.
 
Material properties
  • Complies with FDA regulations for repeated contact with food
  • Good media resistance
  • For wet environments
  • Good wear-resistance

Typical application areas  
When to use it?
  • If you need maintenance-free materials
  • If high compressive strength is required
  • If high flexibility is required
When not to use it?
  • If temperatures are higher than +90 °C
  • If diameters above 50 mm are required
  • If rotation speeds higher than 0.5 m/s are required
Чтобы найти нужный продукт, воспользуйтесь возможностями фильтрации

Tolerances
 
Maintenance-free igubal® spherical balls are designed with a tolerance of the inner diameter of E10. The shaft tolerance should be between h6 and h9. Unless stated otherwise, all tolerance values are treated according to DIN ISO 2768-m
Технические характеристики
Загрузки

Другие решения